|
Tank Melter for small melt rates - model MITSU 40
HIP-MITSU continuous output melting units model MITSU 40 for hot melt adhesives, also PUR and UV curable, meet all your needs about very low melting capacity.
They are equipped with high precision gear or alternative pumps and guarantee extreme precision in all conditions of use, both continuous and intermittent.
The standardized and integrated design enables an easy use, a quick and simple interface with the main line.
PERFORMANCES
Melt rate: from 2,5 kg/hour Applications: both continuous and intermittent Standard pumps available: gear or alternative pumps Pump capacity control and setting: electronic Adhesive type: hot melt; hot melt UV curable; PUR Usable packaging: chips and or blocks Working temperatures: up to 240°C Performance upgrading: standard
ADVANTAGES AND TECHNICAL FEATURES
Control and setting of pump capacity: electronic, clear and user-friendly operator interface. Easy replaceable armored cartridge resistances: easy replaceable armored cartridge resistances, both for tanks and grids. Replacement of the entire heated block is therefore not necessary. Interchangeable pumps with different capacity: all HIP-MITSU continuous output melting units can be equipped with different pumps, which can be interchanged in a few minutes, in order to increase the pump rate also after first installation. Increase of applied hoses for adhesive application after first installation.By-pass for intermittent applications: MITSU continuous output melting units are equipped with by-pass installed after the pump, enabling intermittent adhesive applications.
|